WIRELESS BASIC CONFIGURATION WLC 2504

 

This LAB presents the basic configuration of the Cisco Wireless Controller. The Access Points are connected to WLC and have power over ethernet. 

The configuration was implemented according to the topology showing the image.

 

WLC Model:   Cisco wireless controller 2504
Version IOS: 7.6.120.0
Subject: Basic Configuration of WLC
Category LAB: Wireless

 

 

 

 

 

(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.120.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 16.0

Build Type....................................... DATA + WPS

System Name...................................... LABBOOK-WLC
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 10.100.5.240
Last Reset....................................... Power on reset
System Up Time................................... 3 days 21 hrs 33 mins 24 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

Configured Country............................... GR  - Greece
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +33 C
External Temperature............................. +40 C
Fan Status....................................... 4000 rpm

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 2

Burned-in MAC Address............................ 1C:DE:A7:06:06:80
Maximum number of APs supported.................. 5

 

 

(Cisco Controller) >show inventory
Burned-in MAC Address............................ AA:AA:AA:BB:BB:BB
Maximum number of APs supported.................. 5
NAME: "Chassis"    , DESCR: "Cisco 2500 Series Wireless LAN Controller"
PID: AIR-CT2504-K9,  VID: V04,  SN: 12312381211

 

(Cisco Controller) show>interface detailed  management
Interface Name................................... management
MAC Address...................................... AA:AA:AA:BB:BB:BB
IP Address....................................... 10.100.5.240
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 10.100.5.1
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. untagged 
Quarantine-vlan.................................. 0
Active Physical Port............................. 1        
Primary Physical Port............................ 1        
Backup Physical Port............................. Unconfigured
DHCP Proxy Mode.................................. Global
Primary DHCP Server.............................. 10.100.5.240
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
IPv4 ACL......................................... Unconfigured
mDNS Profile Name................................ Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No
L2 Multicast..................................... Enabled

 

 

(Cisco Controller) show>interface detailed  virtual   
Interface Name................................... virtual
MAC Address...................................... AA:AA:AA:BB:BB:BB
IP Address....................................... 1.1.1.1
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No

 

(Cisco Controller) show>ap inventory  all
Inventory for LABBOOK-AP-2

NAME: "Cisco AP"    , DESCR: "Cisco Wireless Access Point"
PID: AIR-CAP1602I-E-K9,  VID: V01,  SN: AAA1837B2AB
NAME: "Dot11Radio0"    , DESCR: "802.11N 2.4GHz Radio"
PID: UNKNOWN,  VID:  ,  SN: CCC11234AAS
 NAME: "Dot11Radio1"    , DESCR: "802.11N 5GHz Radio"
PID: UNKNOWN,  VID:  ,  SN: CCC11234AAS

Inventory for LABBOOK-AP-1

NAME: "Cisco AP"    , DESCR: "Cisco Wireless Access Point"
PID: AIR-CAP1602I-E-K9,  VID: V01,  SN: BBB1837A2BA
NAME: "Dot11Radio0"    , DESCR: "802.11N 2.4GHz Radio"
PID: UNKNOWN,  VID:  ,  SN: DDD11234BBS
 NAME: "Dot11Radio1"    , DESCR: "802.11N 5GHz Radio"
PID: UNKNOWN,  VID:  ,  SN: DDD11234BBS

 

----------------------------------------------------------------------------------

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Read 5554 times
Published in Wireless